RCC Structures Design MCQ

RCC Structures Design MCQ

  • Admin
  • 31st Aug, 2022

RCC Structures Design MCQ Questions

Take RCC Structures Design MCQ Test to Test Your Knowledge

Practice here the best RCC Structures Design MCQ Questions that checks your basic knowledge of RCC Structures Design. This RCC Structures Design MCQ Test contains 20 Multiple Choice Questions. You have to select the right answer to the question. Finally, you can also download hereRCC Structures Design MCQ PDF, completely free.

RCC Structures Design MCQ Test

1) What does RCC mean in construction?

  • A. Reinforced Concrete Cement
  • B.Reinforced Cement Concrete
  • C.Reinforced Combined Cement
  • D.Reinforced Constituent Cement

2) The end or side covers for steel bar may be taken as ............. In RCC work.

  • A. 7cm to 9cm
  • B.6cm to 9cm
  • C.4cm to 5cm
  • D.3cm to 7cm

3) The cheaper way of protecting rebars is by coating them with calcium sulfate.

  • A. True
  • B.False

4) The diameter of the longitudinal bars of a column should never be less than 12 mm.

  • A. True
  • B.False

5) How many R.C.C. columns shall be for minimum clear cover?

  • A. Greater of 25 mm or diameter
  • B.Smaller of 40 mm or diameter
  • C.Greater of 25 mm or diameter
  • D.Smaller of 25 mm or diamete

6) A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis ......

  • A. 1/25th of span
  • B.1/40th of span.
  • C.1/20th of span
  • D.None of the above

7) What is the advantage of a concrete pile over a timber pile?

  • A. Higher bearing capacity
  • B.No restriction on length
  • C.No decay due to termites
  • D.All of the above

8) The effective width of a column strip of a flat slab, is ...........

  • A. Radius of the column
  • B.Half the width of the panel
  • C.Diameter of the column
  • D.None of the above

9) The Design of R.C.C. cantilever beams, is based on the resultant force at ...........

  • A. Free end
  • B.Mid span
  • C.Fixed end
  • D.None of the above

10) Distribution reinforcement in a simply supported slab, is provided to distribute

  • A. Load
  • B.Shrinkage stress
  • C.Temperature stress
  • D.All of the above

11) The amount of reinforcement for main bars in a slab is based upon

  • A. Minimum shear force
  • B.Maximum shear force
  • C.Minimum bending moment
  • D.Maximum bending moment

12) The advantage of reinforced concrete is due to .........

  • A. Monolithic character
  • B.Fire-resisting and durability
  • C.Economy because of less maintenance cost
  • D.All of the above

13) The effective span of a simply supported slab is

  • A. Clear span plus effective depth of the slab
  • B.Distance between the centres of the bearings
  • C.Clear distance between the inner faces of the walls plus twice the thickness of the wall
  • D.None of the above

14) The shear reinforcement in RCC is provided to resist

  • A. Vertical shear
  • B.Horizontal shear
  • C.Diagonal tension
  • D.Diagonal compression

15) The steel generally used in R.C.C. work, is

  • A. Mildsteel
  • B.Stainless
  • C.High carbon steel
  • D.High tension steel

16) If the diameter of the main reinforcement in the slab is 16 mm, what will be the solid for the main bars?

  • A. 13 mm
  • B.16 mm
  • C.14 mm
  • D.15 mm

17) What should be the width of the ribbed slab between the two strips?

  • A. 6 cm to 7.5 cm
  • B.10 cm to 12 cm
  • C.8 cm to 10 cm
  • D.12 cm to 15 cm

18) What is the maximum permissible size of aggregates to be used in casting the ribs of a slab?

  • A. 5 mm
  • B.15 mm
  • C.10 mm
  • D.7.5 mm

19) An R.C.C. column is treated as short column if its slenderness ratio is less than ........

  • A. 35
  • B.40
  • C.50
  • D.45

20) Which of the following steel generally used in RCC work?

  • A. Stainless
  • B.Mild steel
  • C.High carbon steel
  • D.High tension steel

Leave A Comment :

Valid name is required.

Valid name is required.

Valid email id is required.