Docks and Harbor Engineering MCQ

Docks and Harbor Engineering MCQ

  • Admin
  • 29th Mar, 2022

Take Docks and Harbor Engineering MCQ Test & Online Quiz to test your Knowledge

Below are the Docks and Harbor Engineering MCQ test that checks your basic knowledge of Docks and Harbor Engineering. This Docks and Harbor Engineering MCQ Test contains 20 Multiple Choice Questions. You have to select the right answer to the question. Finally, you can also take the Online Quiz from the Take Docks and Harbor Engineering Quiz Button.

Docks and Harbor Engineering MCQ Test

1) The shape of docks and basins is generally kept in ...........

  • A. Rectangular ways
  • B.Inclined quays
  • C.Diamond shape quays
  • D.All of the Above

2) The width of the entrances of the harbours is restricted to

  • A. 180 m
  • B.150 m
  • C.125 m
  • D.100 m

3) The fixed mooring does not require ...........

  • A. Capstan
  • B.Anchors
  • C.Bollard
  • D.Mooring post

4) A harbour is a place where .............. get shelter and protection against destructive forces due to sea waves

  • A. Planes
  • B.Trains
  • C.Ships
  • D.None of the above

5) What is a roadstead?

  • A. It is the end of the road at the harbour.
  • B.It may be protected by break water walls.
  • C.It is a protected area of water where boats can move safely.
  • D.None of the above

6) What is the vertical distance from a water line to the bottom of a ship called when a ship floats on its designed waterline?

  • A. Beam
  • B.Draft
  • C.Depth
  • D.Free-board

7) Which of the following structures protects the shore by trapping of littoral drift?

  • A. Moles
  • B.Groynes
  • C.Sea walls
  • D.Revetments

8) What is the called the chamber, where a ship is berthed and lifted by principles of buoyancy?

  • A. Dry dock
  • B.Wet dock
  • C.Refuge dock
  • D.Floating dock

9) What is the most popular method of construction of wall breakwaters?

  • A. Barge method
  • B.Staging method
  • C.Low level method
  • D.None of the above

10) ........ is a fixed type mooring accessory?

  • A. Cables
  • B.Buoys
  • C.Bollard
  • D.Anchors

11) The Repair docks are ............

  • A. Dry docks, wet docks, floating docks, lift docks
  • B.Wet docks, lift docks, marine railways, dry docks
  • C.Wet docks, floating docks, lift docks, marine railways
  • D.Marine railways, dry docks, floating docks, wet docks

12) ......... results in the greatest protection of shore structures?

  • A. Vertical sea wall
  • B.Stepped sea wall
  • C.Sea wall with batter
  • D.Sea wall with concave face

13) What is used as a basis for the classification of the harbor?

  • A. Area
  • B.Protection
  • C.Placement
  • D.Climatic condition

14) Which of the following options will come under the classification of Bombay Port?

  • A. Natural harbor
  • B.Artificial harbor
  • C.Semi Natural harbor
  • D.Semi Artificial harbor

15) Which of the following option is not come under the category of harbor classification?

  • A. Artificial harbor
  • B.Natural harbor
  • C.Semi artificial harbor
  • D.Semi natural harbor

16) Which of the following harbor is having artificial protection?

  • A. Yanam port
  • B.Kakinada port
  • C.Mumbai port
  • D.Vishakhapatnam port

17) What is the important component of a sea port?

  • A. The docks
  • B.The harbours
  • C.Terminal buildings
  • D.All of the above

18) The heaviest line is used to democrat the ...........

  • A. The low water line
  • B.The high water line
  • C.The limit of swamps
  • D.None of the above

19) ............ is used for tying a ship with a dock.

  • A. Bow line
  • B.Stern line
  • C.Spring line
  • D.All of the above

20) Choose the incorrect statement from the following option?

  • A. A falling hydraulic gradient occurs in the direction of the wave
  • B.The wave while receding carries finer particles out to deep water
  • C.The on-shore wind helps to produce wave action as well as rise of M.S.L
  • D.None of the above

Leave A Comment :

Valid name is required.

Valid name is required.

Valid email id is required.