Electrical Cables MCQ

  1. The electrostatic stress in underground cables is ..........
  2. What is the main purpose of an electric cable?
  3. What does PVC stands for?
  4. In capacitance grading of cables we use ____ dielectric.
  5. Grading of cables:
  6. Capacitance grading of cable implies:
  7. In a cable the maximum stress under operating conditions is at ___.
  8. In case of three core flexible cable the color of the neutral is ___.
  9. In a cable the voltage stress is maximum at:
  10. What is the main advantage of cables over overhead transmission lines?
  11. What is the advantage of oil filled cables?
  12. Underground cables are laid at sufficient depth:
  13. Sulphur hexafluoride cable is insulated by___.
  14. Is Polyethylene has very poor dielectric and ageing properties?
Electrical Cables MCQ

Take Electrical Cables MCQ Test & Online Quiz to test your Knowledge

Practice here the best Electrical Cables MCQ Questions that checks your basic knowledge of Electrical Cables. This Electrical Cables MCQ Test contains 20+ Multiple Choice Questions. You have to select the right answer to the question. Apart from this, you can also download here the Electrical Cables MCQ Pdf completely free.

  • Same at the conductor and the sheath
  • Zero at the conductor as well as on the sheath
  • Maximum at the conductor and minimum at the sheath
  • Minimum at the conductor and maximum at the sheath
View Answer
  • transporting mechanical energy from one point to another
  • transporting electrical energy from one point to another
  • transporting hydrolic energy from one point to another
  • None of the above
View Answer
  • Polyvinyl chloride
  • Post varnish conductor
  • Pressed and varnished cloth
  • Positive voltage conductor
View Answer
  • Homogeneous
  • Composite
  • Heterogeneous
  • None of the above
View Answer
  • Reduces insulation cost and increases current rating
  • Reduces insulation cost but decreases current rating
  • Increases both
  • Either A or B
Download Free : Electrical Cables MCQ PDF
View Answer
  • Use of dielectrics of different permeabilities
  • Grading according to capacitance of cables per km length
  • Cables using single dielectric in different concentrations
  • Capacitance required to be introduced at different lengths to counter the effect of inductance
View Answer
  • Insulation layer
  • Conductor surface
  • Armour
  • Sheath
View Answer
  • Sheath
  • Core of the conductor
  • Surface of the conductor
  • Insulator
View Answer
  • Easy maintenance
  • used in high voltage circuits
  • used in congested areas
  • Low cost
View Answer
  • More perfect impregnation
  • Smaller overall size
  • No ionization, oxidation and formation of voids
  • All of the above
View Answer
  • To minimize temperature stresses
  • To avoid being unearthed easily due to removal of soil
  • To minimize the effect of shocks and vibrations due to gassing vehicles, etc.
  • For all of the above reasons
View Answer
  • compressed gas
  • PVC
  • High-pressure oil
  • Impregnated paper
View Answer
  • Varnished cambric
  • Vulcanized rubber
  • Impregnated paper
  • None of the above
View Answer
  • Be acid proof
  • Be non-inflammable
  • Be non-hygroscopic
  • Have all above properties
View Answer
  • becomes one-fourth
  • remains unchanged
  • becomes double
  • becomes one-half
View Answer
  • lower transmission losses
  • absorb emergency power loads
  • lower maintenance costs
  • additional cost for the cable
View Answer