DC Generator MCQ Quiz

  1. A, D.C. welding generator has _____________ .
  2. In a D.C. generator the magnetic neutral axis coincides with the geometrical neutral axis, when ________________ .
  3. When two D.C. generators are running in parallel an equalizer bar is used So that the two identical machines will pass approximately equal currents to the load.
  4. The armature of DC generator is laminated to ______________ .
  5. In D.C. generators, lap winding is used for __________________ .
  6. which of the following regulation is preferred With a D.C. generator ?
  7. What is full load terminal voltage In a level compounded D.C. generator ?
  8. The resistance of armature winding depends on which of the following ?
  9. In a four-pole D.C. machine Alternate poles are north and south.
  10. In a commutator _________________ .
  11. We connect two generators in parallel For large DC load.
  12. Thy yoke of a dc generator is made of cast iron because _________________ .
  13. The bearings used to support the rotor shofts are generally ________________________ .
  14. In case of D.C. machines, mechanical lossess are primary function of -
DC Generator MCQ

Take DC Generator Quiz To test your Knowledge

Below are few DC Generator MCQ test that checks your basic knowledge of DC Generator. This DC Generator Test contains around 20 questions of multiple choice with 4 options. You have to select the right answer to a question. You can see the correct answer by clicking the view answer link.

  • Wave moving
  • Lap winding
  • Duplex winding
  • All of the above
View Answer
  • The generator runs on full load
  • There is no load on the generator
  • The generator runs on overload
  • The generator runs on designed speed
View Answer
  • Reduce Hysteresis loss
  • Insulate the Core
  • Reduce eddy current loss
  • Provide air cooling passage
View Answer
  • High voltage, high current
  • High voltage, low current
  • Low voltage, high current
  • Low voltage, low current
View Answer
  • 100% regulation
  • 1% regulation
  • 50% regulation
  • Infinite regulation
View Answer
  • Equal to no-load terminal voltage
  • Negligibly low
  • More than no-load terminal voltage
  • Less than no-load terminal voltage
View Answer
  • Cross-sectional area of the conductor
  • Length of conductor
  • Number of conductors
  • All of the above
View Answer
  • true
  • false
View Answer
  • mica and copper are equally hard
  • Copper is harder than mica
  • mica is harder than copper
  • none of the above
View Answer
  • It is cheaper
  • It gives mechanical protection to the machine
  • It completes the magnetic path
  • All of these
View Answer
  • ball bearings
  • magnetic bearings
  • needle bearings
  • bush bearings
View Answer
  • Current
  • Voltage
  • Speed
  • none+
View Answer
  • Carbon
  • Soft Copper
  • hard copper
  • all of the above
View Answer
  • Mica
  • Copper
  • Cost Iron
  • Carbon
View Answer
  • true
  • false
View Answer
  • D.C. Motor
  • Transformer
  • D.C. Generaotor
  • Altenator
View Answer
  • 2
  • 4
  • 6
  • 8
View Answer